Double Shouldered Eyelets

Textile Machinery Parts and Components Since 1975
Working harder to serve you better.

On This Page: ( Click a Topic ... View a Topic )

Product Dimension Diagram
Product Specification Table
Part Numbers
Material Codes

Double Shouldered Eyelet Dimensions

Double Shouldered Eyelets - Specification Table

PART #	A - Flange OD		B - Groove OD		C - ID		D - Groove Width		E - OAL
PART #	IN	MM	IN	MM	IN	MM	IN	MM	IN	MM
G-104-AP	0.110	2.8	0.095	2.4	0.039	1.0	0.020	0.5	0.079	2.0
G-032-AW	0.223	5.7	0.184	4.7	0.090	2.3	0.050	1.3	0.110	2.8
G-032-T	0.223	5.7	0.184	4.7	0.090	2.3	0.050	1.3	0.110	2.8
G-032-TC	0.223	5.7	0.184	4.7	0.090	2.3	0.050	1.3	0.110	2.8
G-012-TC/1	0.171	4.3	0.136	3.5	0.094	2.4	0.100	2.5	0.198	5.0
G-031-AW	0.295	7.5	0.240	6.1	0.100	2.5	0.065	1.7	0.195	5.0
G-045-AW	0.299	7.6	0.236	6.0	0.098	2.5	0.071	1.8	0.189	4.8
G-022-AR	0.276	7.0	0.236	6.0	0.120	3.0	0.041	1.0	0.117	3.0
G-031-T	0.314	8.0	0.210	5.3	0.120	3.0	0.072	1.8	0.185	4.7
G-021-AP	0.316	8.0	0.219	5.6	0.118	3.0	0.055	1.4	0.250	6.4
G-042-AW	0.315	8.0	0.236	6.0	0.118	3.0	0.047	1.2	0.236	6.0
G-033-AW	0.313	8.0	0.256	6.5	0.120	3.0	0.065	1.7	0.188	4.8
G-033-TC	0.313	8.0	0.256	6.5	0.120	3.0	0.065	1.7	0.188	4.8
G-064-TC	0.323	8.2	0.244	6.2	0.122	3.1	0.059	1.5	0.161	4.1
G-038-AW	0.354	9.0	0.243	6.2	0.140	3.6	0.127	3.2	0.250	6.4
G-076-AR	0.315	8.0	0.256	6.5	0.158	4.0	0.071	1.8	0.217	5.5
G-014-TC	0.323	8.2	0.240	6.1	0.156	4.0	0.106	2.7	0.220	5.6
G-041-AW	0.335	8.5	0.276	7.0	0.165	4.2	0.158	4.0	0.276	7.0
G-037-T	0.351	8.9	0.275	7.0	0.165	4.2	0.157	4.0	0.275	7.0
G-099-AP	0.358	9.1	0.280	7.1	0.177	4.5	0.055	1.4	0.161	4.1
G-073-AP	0.469	11.9	0.355	9.0	0.232	5.9	0.078	2.0	0.244	6.2
G-035-AW	0.750	19.1	0.475	12.1	0.250	6.4	0.157	4.0	0.355	9.0
G-078-AW	0.520	13.2	0.392	10.0	0.289	7.3	0.141	3.6	0.280	7.1
G-061-AW	0.722	18.3	0.588	14.9	0.396	10.1	0.134	3.4	0.232	5.9
G-079-AP	0.827	21.0	0.673	17.1	0.406	10.3	0.134	3.4	0.284	7.2
G-023-AP	0.961	24.4	0.818	20.8	0.585	14.9	0.144	3.7	0.289	7.3
G-095-AW	1.339	34.0	1.181	30.0	0.878	22.3	0.130	3.3	0.382	9.7
G-034-AW	1.572	39.9	1.454	36.9	1.058	26.9	0.140	3.6	0.653	16.6

Don't see what you're looking for? Contact us: Contact Information.

Part Numbers in this catalogue follow the pattern: X-999-MM where: X is a category 999 is an item number MM is a material code ( See Material Codes below ) Part Numbers may also appear in RED: X-999-MM where: Red indicates that special finishes are available. ( See Special Finishes below ).
Material Codes (available for products on this page):
	AP (alumina pink): This is a higher quality alumina oxide, 95 to 99.7% pure. Long lasting, the 99.7% pure ceramic material is commonly available in various surface finishes, making it easier to find a ceramic to fit customer applications.
	AR (alumina red): This is a deep red material, of 85% purity alumina oxide. With low density and low hardness, it is a general purpose ceramic.
	AW (alumina white): This material is white in color. This can be alumina or 95% pure zirconia, and is suitable for general applications.
	T (titania): This material is tan in color, and has been used for many years. 90% pure material, this is a soft ceramic which wears with the yarn, for applications where yarn damage is minimal.
	TBR (titania brown): This is titania material, similar to 90% pure titania, in a slightly browner shade.
	TC (titania conductive): This material is dark grey in color, and has been widely used for some time. It is the same 90% pure titania, but it is fired with an additive to make it neutralize electric charge. For applications where static is a problem, the nature of this material can be helpful.
	PW (porcelain white): This is an older material made of porcelain and usually with a glass glaze finish. It is suitable to applications where yarn quality is not a concern, and economy is. Note: This material is available from stock only - no new production.