Grooved Eyelets

Textile Machinery Parts and Components Since 1975
Eyelets for every application.

Grooved Eyelets

On This Page: ( Click a Topic ... View a Topic )

Product Dimension Diagram
Product Specification Table
Part Numbers
Material Codes

Grooved Eyelet Dimensions

Illustration: Lane and Associates

Grooved Eyelets - Specification Table

PART #	A - SHANK OD		B - FLANGE OD		C - ID		D- SHANK L		E - OAL		F- LIP/ GROOVE
PART #	IN	MM	IN	MM	IN	MM	IN	MM	IN	MM	IN	MM
B-056-AW	0.178	4.5	0.250	6.4	0.078	2.0	0.270	6.9	0.312	7.9	0.075	1.9
B-056-T	0.178	4.5	0.250	6.4	0.078	2.0	0.270	6.9	0.312	7.9	0.075	1.9
B-043-TC	0.178	4.5	0.227	5.8	0.081	2.1	0.145	3.7	0.228	5.8	0.074	1.9
B-055-AW	0.180	4.6	0.250	6.4	0.063	1.6	0.141	3.6	0.188	4.8	0.067	1.7
B-055-T	0.180	4.6	0.250	6.4	0.063	1.6	0.141	3.6	0.188	4.8	0.067	1.7
B-045-TC	0.228	5.8	0.307	7.8	0.114	2.9	0.185	4.7	0.256	6.5	0.079	2.0
B-030-TC/1	0.236	6.0	0.335	8.5	0.059	1.5	0.197	5.0	0.276	7.0	0.047	1.2
B-066-TC	0.244	6.2	0.311	7.9	0.118	3.0	0.158	4.0	0.228	5.8	0.063	1.6
B-057-AW	0.248	6.3	0.301	7.6	0.090	2.3	0.254	6.5	0.312	7.9	0.125	3.2
B-057-T	0.248	6.3	0.301	7.6	0.090	2.3	0.254	6.5	0.312	7.9	0.125	3.2
B-042-AW	0.255	6.5	0.341	8.7	0.151	3.8	0.159	4.0	0.220	5.6	0.072	1.8
B-058-T	0.266	6.8	0.364	9.2	0.125	3.2	0.171	4.3	0.217	5.5	0.062	1.6
B-079-PW	0.270	6.9	0.549	13.9	0.116	3.0	0.249	6.3	0.356	9.0	0.162	4.1
B-014-AW	0.284	7.2	0.354	9.0	0.142	3.6	0.232	5.9	0.295	7.5	0.106	2.7
B-067-AR	0.296	7.5	0.355	9.0	0.140	3.6	0.202	5.1	0.281	7.1	0.087	2.2
B-068-AR	0.295	7.5	0.394	10.0	0.157	4.0	0.236	6.0	0.315	8.0	0.118	3.0
B-078-PW	0.301	7.6	0.383	9.7	0.158	4.0	0.288	7.3	0.369	9.4	0.194	4.9
B-054-T	0.304	7.7	0.431	10.9	0.125	3.2	0.474	12.0	0.584	14.8	0.349	8.9
B-054-TC	0.304	7.7	0.431	10.9	0.125	3.2	0.474	12.0	0.584	14.8	0.349	8.9
B-064-AP	0.303	7.7	0.366	9.3	0.157	4.0	0.264	6.7	0.323	8.2	0.158	4.0
B-071-TC	0.311	7.9	0.378	9.6	0.047	1.2	0.268	6.8	0.335	8.5	0.146	3.7
B-059-T	0.312	7.9	0.375	9.5	0.125	3.2	0.172	4.4	0.250	6.4	0.094	2.4
B-011-TC	0.311	7.9	0.374	9.5	0.138	3.5	0.268	6.8	0.319	8.1	0.150	3.8
B-065-TC	0.310	7.9	0.393	10.0	0.158	4.0	0.327	8.3	0.414	10.5	0.199	5.1
B-081-TC	0.314	8.0	0.393	10.0	0.158	4.0	0.194	4.9	0.251	6.4	0.070	1.8
B-053-AR	0.318	8.1	0.375	9.5	0.154	3.9	0.265	6.7	0.335	8.5	0.151	3.8
B-063-AW	0.341	8.7	0.392	10.0	0.183	4.6	0.212	5.4	0.283	7.2	0.095	2.4
B-052-T	0.368	9.3	0.438	11.1	0.203	5.2	0.171	4.3	0.234	5.9	0.063	1.6
B-061-TC	0.370	9.4	0.465	11.8	0.240	6.1	0.276	7.0	0.362	9.2	0.134	3.4
B-051-AW	0.374	9.5	0.500	12.7	0.187	4.8	0.298	7.6	0.359	9.1	0.205	5.2
B-051-T	0.374	9.5	0.500	12.7	0.187	4.8	0.298	7.6	0.359	9.1	0.205	5.2
B-023-AW	0.382	9.7	0.532	13.5	0.250	6.4	0.437	11.1	0.625	15.9	0.312	7.9
B-023-TC	0.382	9.7	0.532	13.5	0.250	6.4	0.437	11.1	0.625	15.9	0.312	7.9
B-083-TC	0.390	9.9	0.508	12.9	0.185	4.7	0.189	4.8	0.280	7.1	0.095	2.4
B-086-AW	0.453	11.5	0.630	16.0	0.248	6.3	0.433	11.0	0.550	14.0	0.256	6.5
B-076-TC/1	0.465	11.8	0.616	15.6	0.205	5.2	0.321	8.2	0.418	10.6	0.146	3.7
B-085-T	0.465	11.8	0.634	16.1	0.252	6.4	0.441	11.2	0.559	14.2	0.252	6.4
B-072-TC	0.465	11.8	0.607	15.4	0.303	7.7	0.284	7.2	0.402	10.2	0.118	3.0
B-082-TC	0.535	13.6	1.491	37.9	0.136	3.5	0.404	10.3	0.609	15.5	0.260	6.6
B-076-TC	0.544	13.8	0.717	18.2	0.158	4.0	0.390	9.9	0.453	11.5	0.264	6.7
B-082-TC	0.551	14.0	1.516	38.5	0.177	4.5	0.394	10.0	0.630	16.0	0.236	6.0
B-084-TC	0.583	14.8	0.811	20.6	0.386	9.8	0.248	6.3	0.374	9.5	0.110	2.8
B-073-AR	0.748	19.0	0.937	23.8	0.492	12.5	0.213	5.4	0.256	6.5	0.059	1.5
B-087-AP	1.181	30.0	1.378	35.0	0.787	20.0	0.472	12.0	0.630	16.0	0.236	6.0
B-070-TC	1.220	31.0	1.378	35.0	1.000	25.4	0.433	11.0	0.630	16.0	0.140	3.6

Don't see what you're looking for? Contact us: Contact Information.

Part Numbers in this catalogue follow the pattern: X-999-MM where: X is a category 999 is an item number MM is a material code ( See Material Codes below ) Part Numbers may also appear in RED: X-999-MM where: Red indicates that special finishes are available. ( See Special Finishes below ).
Material Codes (available for products on this page):
	AP (alumina pink): This is a higher quality alumina oxide, 95 to 99.7% pure. Long lasting, the 99.7% pure ceramic material is commonly available in various surface finishes, making it easier to find a ceramic to fit customer applications.
	AR (alumina red): This is a deep red material, of 85% purity alumina oxide. With low density and low hardness, it is a general purpose ceramic.
	AW (alumina white): This material is white in color. This can be alumina or 95% pure zirconia, and is suitable for general applications.
	T (titania): This material is tan in color, and has been used for many years. 90% pure material, this is a soft ceramic which wears with the yarn, for applications where yarn damage is minimal.
	TBR (titania brown): This is titania material, similar to 90% pure titania, in a slightly browner shade.
	TC (titania conductive): This material is dark grey in color, and has been widely used for some time. It is the same 90% pure titania, but it is fired with an additive to make it neutralize electric charge. For applications where static is a problem, the nature of this material can be helpful.
	PW (porcelain white): This is an older material made of porcelain and usually with a glass glaze finish. It is suitable to applications where yarn quality is not a concern, and economy is. Note: This material is available from stock only - no new production.