Pigtails and Dogtails

Textile Machinery Parts and Components Since 1975
Quality components at competitive prices.

On This Page: ( Click a Topic ... View a Topic )

Product Pictures
Product Specification Table
Part Numbers
Material Codes
Special Finishes

Pigtail / Dogtail - Product Pictures
Click on a picture for a close-up view.

Q-010-AW	Q-011-AW	Q-010-AW/1	Q-011-AW/1	Q-020-AP	Q-032-AP
Q-033-AP	Q-024-AP	Q-026-AP	Q-027-AP	Q-049-AP	Q-037-AP
Q-041-AP	Q-040-AP	Q-045-AP	Q-046-AP	Q-042-AP	Q-043-AP
Q-028-AP-1	Q-034-AP	Q-038-AP	Q-048-AP	Q-023-AW	Q-044-AP
Q-035-AP	Q-036-AP	Q-030-AP	Q-025-AP	Q-017-AP	Q-047-AP
Q-013-AP	Q-014-AP	Q-019-AP	Q-015-AP	Z-055	Z-069 Various mounts available.
Z-143	Z-173-3 Various mounts available.	Z-175 Various mounts available.	Z-193-0 Various mounts available.	Z-226	Z-258
Z-259	Z-260	Z-295	Z-073	Z-088-2
	Not all items are shown here. See table below.		Don't see what you're looking for? Contact us: Contact Information.

Pigtail / Dogtail - Specification Table

PART #	EYE CTR TO END		OVERALL LENGTH		YARN PATH DIAMETER		SHANK DIAMETER		HOLE MTG DIAMETER		RH / LH
PART #	IN	MM	IN	MM	IN	MM	IN	MM	IN	MM	RH / LH
Q-010-AW	0.394	10.0	0.984	25.0	0.059	1.5	0.236	6.0	0.138	3.5	L
Q-010-AW/1	0.984	25.0	1.575	40.0	0.059	1.5	0.236	6.0	~	~	L
Q-011-AW	0.394	10.0	0.984	25.0	0.059	1.5	0.236	6.0	0.138	3.5	R
Q-011-AW/1	0.984	25.0	1.575	40.0	0.059	1.5	0.236	6.0	~	~	R
Q-013-AP	0.394	10.0	0.551	14.0	0.079	2.0	0.236	6.0	0.157	4.0	~
Q-014-AP	0.591	15.0	0.827	21.0	0.157	4.0	0.236	6.0	0.157	4.0	~
Q-015-AP	0.787	20.0	0.984	25.0	0.118	3.0	~	FLAT	~	~	~
Q-017-AP	0.394	10.0	0.472	12.0	0.039	1.0	0.118	3.0	~	~	~
Q-019-AP	0.591	15.0	0.925	23.5	0.315	8.0	0.236	6.0	0.157	4.0	~
Q-020-AP	0.787	20.0	1.378	35.0	0.157	4.0	0.157	4.0	~	~	L
Q-023-AW	0.709	18.0	1.024	26.0	0.079	2.0	0.138	3.5	~	~	L
Q-024-AP	0.551	14.0	0.984	25.0	0.118	3.0	0.118	3.0	~	~	R
Q-025-AP	0.709	18.0	0.827	21.0	0.079	2.0	0.157	4.0	~	~	~
Q-026-AP	0.591	15.0	0.984	25.0	0.157	4.0	0.157	4.0	~	~	L
Q-027-AP	0.591	15.0	0.984	25.0	0.157	4.0	0.157	4.0	~	~	R
Q-028-AP-1	0.394	10.0	0.787	20.0	0.039	1.0	0.157	4.0	0.079	2.0	L
Q-030-AP	0.709	18.0	1.063	27.0	0.197	5.0	0.146	3.7	~	~	L
Q-032-AP	0.787	20.0	1.378	35.0	0.157	4.0	0.157	4.0	~	~	R
Q-033-AP	0.591	15.0	0.984	25.0	0.118	3.0	0.118	3.0	~	~	L
Q-034-AP	0.394	10.0	0.787	20.0	0.039	1.0	0.157	4.0	0.079	2.0	R
Q-035-AP	1.181	30.0	1.654	42.0	0.197	5.0	0.197	5.0	~	~	L
Q-036-AP	1.181	30.0	1.654	42.0	0.197	5.0	0.197	5.0	~	~	L
Q-037-AP	0.709	18.0	0.945	24.0	0.079	2.0	0.118	3.0	~	~	R
Q-038-AP	1.575	40.0	2.047	52.0	0.315	8.0	0.197	5.0	~	~	L
Q-040-AP	0.866	22.0	1.260	32.0	0.118	3.0	0.126	3.2	~	~	R
Q-041-AP	0.866	22.0	1.260	32.0	0.118	3.0	0.126	3.2	~	~	L
Q-042-AP	0.787	20.0	1.181	30.0	0.039	1.0	0.157	4.0	0.091	2.3	L
Q-043-AP	0.787	20.0	1.181	30.0	0.039	1.0	0.157	4.0	0.091	2.3	R
Q-044-AP	0.709	18.0	1.024	26.0	0.079	2.0	0.118	3.0	~	~	L
Q-045-AP	0.591	15.0	0.906	23.0	0.039	1.0	0.118	3.0	~	~	L
Q-046-AP	0.591	15.0	0.906	23.0	0.039	1.0	0.118	3.0	~	~	R
Q-047-AP	0.354	9.0	0.472	12.0	0.039	1.0	0.236	6.0	0.157	4.0	~
Q-048-AP	1.181	30.0	1.654	42.0	0.197	5.0	0.197	5.0	~	~	L
Q-049-AP	0.709	18.0	0.945	24.0	0.079	2.0	0.118	3.0	~	~	L

Don't see what you're looking for? Contact us: Contact Information.

Part Numbers in this catalogue follow the pattern: X-999-MM where: X is a category 999 is an item number MM is a material code ( See Material Codes below ) Part Numbers may also appear in RED: X-999-MM where: Red indicates that special finishes are available. ( See Special Finishes below ).
Material Codes (available for products on this page):
	AP (alumina pink): This is a higher quality alumina oxide, 95 to 99.7% pure. Long lasting, the 99.7% pure ceramic material is commonly available in various surface finishes, making it easier to find a ceramic to fit customer applications.
	AR (alumina red): This is a deep red material, of 85% purity alumina oxide. With low density and low hardness, it is a general purpose ceramic.
	AW (alumina white): This material is white in color. This can be alumina or 95% pure zirconia, and is suitable for general applications.
	PCS (polycrystalline sapphire): This is the latest in ceramics technology. This material is near 100% pure alumina oxide, with high density and hardness. Some of these are also offered in specialized surface finishes, ranging from a smooth mirror finish to a controlled "orange-peel" matte finish.
Special Ceramic Finishes (available for products on this page with red Part Numbers):
MF (matte finish): This is where the ceramic is polished an refired to give a controlled "orange-peel" surface finish. this finish is recommended for applications with untwisted flat yarn for less friction.
DP (diamond polish): This is the surface finish that involves heavy polishing. The ceramic surface is finished to a very smooth texture which is ideal for use with textured yarns in the twisting and heating zones. Ceramics with this finish are also ideal for use as interlacing jet entrance and exit guides.