Pins and Rods

Textile Machinery Parts and Components Since 1975
Pins and Rods for every need.

Pins and Rods

On This Page: ( Click a Topic ... View a Topic )

Product Dimension Diagram
Cutting To Specified Lengths
Product Specification Table
Part Numbers
Material Codes
Special Finishes

Pin / Rod Dimensions

Illustration: Lane and Associates

Pins and Rods - Cutting to Specified Lengths

Pins and rods can sometimes be cut to customer-specified lengths for an additional fee.
Please be sure to specify your desired length when requesting a price quote.

Pins and Rods - Specification Table

PART #	A - Diameter		B - Length
PART #	IN	MM	IN	MM
Y-361-AP	0.059	1.5	0.551	14.0
Y-221-AP	0.059	1.5	0.709	18.0
Y-154-AP	0.060	1.5	0.790	20.1
Y-314-TC/MF	0.063	1.6	0.984	25.0
Y-240-AP-1	0.079	2.0	0.669	17.0
Y-385-AP	0.079	2.0	0.984	25.0
Y-240-AP-2	0.095	2.4	0.669	17.0
Y-274-AR	0.094	2.4	0.709	18.0
Y-195-AW	0.099	2.5	0.355	9.0
Y-230-AP/2	0.098	2.5	0.500	12.7
Y-248-AR	0.098	2.5	0.874	22.2
Y-194-AP	0.110	2.8	0.796	20.2
Y-264-AP	0.118	3.0	0.433	11.0
Y-291-AP	0.118	3.0	0.591	15.0
Y-354-AP	0.118	3.0	0.787	20.0
Y-355-AP	0.118	3.0	1.181	30.0
Y-263-AP	0.118	3.0	1.378	35.0
Y-312-AP	0.118	3.0	1.575	40.0
Y-276-AW	0.125	3.2	1.500	38.1
Y-305-AP	0.130	3.3	1.181	30.0
Y-223-AR	0.158	4.0	0.986	25.0
Y-300-AP	0.158	4.0	1.181	30.0
Y-341-AP	0.158	4.0	1.575	40.0
Y-135-AP/1	0.158	4.0	1.811	46.0
Y-396-AP	0.157	4.0	1.969	50.0
Y-339-AP	0.157	4.0	2.165	55.0
Y-397-AP	0.157	4.0	2.756	70.0
Y-112-AR	0.158	4.0	2.953	75.0
Y-284-AR	0.158	4.0	4.724	120.0
Y-192-AW	0.194	4.9	1.508	38.3
Y-367-T	0.197	5.0	0.669	17.0
Y-316-AP/MF	0.197	5.0	1.181	30.0
Y-384-AP	0.197	5.0	1.181	30.0
Y-317-T	0.197	5.0	1.378	35.0
Y-317-TBR	0.197	5.0	1.378	35.0
Y-246-AP	0.197	5.0	1.772	45.0
Y-246-T	0.197	5.0	1.772	45.0
Y-246-TBR	0.197	5.0	1.772	45.0
Y-246-TC	0.197	5.0	1.772	45.0
Y-238-AP	0.197	5.0	1.969	50.0
Y-342-AP	0.197	5.0	1.969	50.0
Y-260-AR	0.197	5.0	2.165	55.0
Y-308-AP/MF	0.197	5.0	2.362	60.0
Y-307-TBR	0.197	5.0	2.756	70.0
Y-311-AP	0.197	5.0	2.756	70.0
Y-313-TBR	0.197	5.0	3.150	80.0
Y-255-AP	0.236	6.0	1.299	33.0
Y-292-AP	0.236	6.0	1.575	40.0
Y-383-AP	0.236	6.0	1.969	50.0
Y-247-AR	0.236	6.0	2.362	60.0
Y-247-TC	0.236	6.0	2.362	60.0
Y-295-AP	0.236	6.0	2.362	60.0
Y-379-AW-060	0.236	6.0	2.362	60.0
Y-250-AP	0.236	6.0	2.756	70.0
Y-379-AW-075	0.236	6.0	2.953	75.0
Y-296-AP	0.236	6.0	3.150	80.0
Y-270-AP	0.236	6.0	3.347	85.0
Y-304-AR	0.236	6.0	3.940	100.0
Y-379-AW-100	0.236	6.0	3.937	100.0
Y-379-AW-500	0.236	6.0	19.685	500.0
Y-150-AR	0.315	8.0	1.772	45.0
Y-111-AR	0.315	8.0	2.362	60.0
Y-111-TBR	0.315	8.0	2.362	60.0
Y-351-AW	0.315	8.0	3.937	100.0
Y-294-AR	0.315	8.0	4.724	120.0
Y-382-AW-500	0.315	8.0	19.685	500.0
Y-303-AW	0.394	10.0	3.937	100.0
Y-380-AW-500	0.394	10.0	19.685	500.0
Y-381-AW-500	0.551	14.0	19.685	500.0

Don't see what you're looking for? Contact us: Contact Information.

Part Numbers in this catalogue follow the pattern: X-999-MM where: X is a category 999 is an item number MM is a material code ( See Material Codes below ) Part Numbers may also appear in RED: X-999-MM where: Red indicates that special finishes are available. ( See Special Finishes below ).
Material Codes (available for products on this page):
	AP (alumina pink): This is a higher quality alumina oxide, 95 to 99.7% pure. Long lasting, the 99.7% pure ceramic material is commonly available in various surface finishes, making it easier to find a ceramic to fit customer applications.
	AR (alumina red): This is a deep red material, of 85% purity alumina oxide. With low density and low hardness, it is a general purpose ceramic.
	AW (alumina white): This material is white in color. This can be alumina or 95% pure zirconia, and is suitable for general applications.
	PCS (polycrystalline sapphire): This is the latest in ceramics technology. This material is near 100% pure alumina oxide, with high density and hardness. Some of these are also offered in specialized surface finishes, ranging from a smooth mirror finish to a controlled "orange-peel" matte finish.
	T (titania): This material is tan in color, and has been used for many years. 90% pure material, this is a soft ceramic which wears with the yarn, for applications where yarn damage is minimal.
	TBR (titania brown): This is titania material, similar to 90% pure titania, in a slightly browner shade.
	TC (titania conductive): This material is dark grey in color, and has been widely used for some time. It is the same 90% pure titania, but it is fired with an additive to make it neutralize electric charge. For applications where static is a problem, the nature of this material can be helpful.
Special Ceramic Finishes (available for products on this page with red Product ID's):
MF (matte finish): This is where the ceramic is polished an refired to give a controlled "orange-peel" surface finish. this finish is recommended for applications with untwisted flat yarn for less friction.
DP (diamond polish): This is the surface finish that involves heavy polishing. The ceramic surface is finished to a very smooth texture which is ideal for use with textured yarns in the twisting and heating zones. Ceramics with this finish are also ideal for use as interlacing jet entrance and exit guides.