Ceramic Roller Guides

Textile Machinery Parts and Components Since 1975
Ceramic Roller Guides to suit any need.

On This Page: ( Click a Topic ... View a Topic )

Product Pictures
Product Specification Table
Part Numbers
Material Codes
Special Finishes

Ceramic Roller Guides - Product Pictures

Click on a picture for a close-up view.

R-013-T	R-014-AR ( also in AW, T, TC )	R-018-AW	R-022-T	R-031-AW	R-045-AR
R-059-AR	R-060-AW	R-061-AW ( also in T)	R-064-AR	R-065-AR	R-067-AR
R-068-T	R088-AR	R-089-AW	R-090-AP ( also in AR )	R-093-AR	R-099-T/2
R-102-AP	R-106-T/2	R-107-T/2	R-108-AP/MF ( available in matte finish only )	R-112-T	R-113-T
R-115-AW	R-116-AP	R-119-T	R-131-T		Don't see what you're looking for? Contact us: Contact Information.

Ceramic Rollers - Specification Table

PART #	Flange OD		Groove OD		ID		Thickness		Other Notes
PART #	IN	MM	IN	MM	IN	MM	IN	MM	Other Notes
R-013-T	0.626	15.9	0.311	7.9	0.157	4.0	0.748	19.0	4 Grooves
R-014-AR	0.788	20.0	0.393	10.0	0.122	3.1	0.531	13.5
R-018-AW	0.669	17.0	0.315	8.0	0.236	6.0	0.906	23.0	2 Grooves
R-022-T	0.984	25.0	0.394	10.0	0.236	6.0	0.709	18.0
R-031-AW	1.083	27.5	0.394	10.0	0.236	6.0	0.551	14.0
R-045-AR	0.590	15.0	0.315	8.0	0.196	5.0	1.043	26.5	8 Grooves
R-059-AR	0.705	17.9	0.278	7.1	0.125	3.2	1.205	30.6	4 Grooves
R-060-AW	1.062	27.0	0.563	14.3	0.250	6.4	0.438	11.1
R-061-AW	1.000	25.4	0.630	16.0	0.256	6.5	0.728	18.5
R-064-AR	0.472	12.0	0.197	5.0	0.095	2.4	1.063	27.0	4 Grooves
R-065-AR	0.750	19.0	0.438	11.1	0.171	4.3	0.750	19.0	Special flanges
R-067-AR	0.709	18.0	0.276	7.0	0.118	3.0	1.181	30.0	4 Grooves
R-068-T	0.775	19.7	0.489	12.4	0.127	3.2	0.285	7.2
R-088-AR	0.551	14.0	0.315	8.0	0.169	4.3	0.394	10.0
R-089-AW	1.142	29.0	0.650	16.5	0.242	6.1	0.551	14.0
R-090-AP	0.551	14.0	0.394	10.0	0.169	4.3	0.394	10.0
R-093-AR	0.591	15	0.374	9.5	0.197	5.0	0.787	20.0	4 Grooves
R-099-T/2	0.669	17.0	0.315	8.0	0.236	6.0	0.433	11.0
R-102-AP	0.647	16.4	0.416	10.6	0.184	4.7	0.951	24.2	4 Grooves
R-106-T/2	0.551	14.0	0.394	10.0	0.138	3.5	0.787	20.0	3 Grooves
R-107-T/2	0.661	16.8	0.394	10.0	0.150	3.8	0.402	10.2
R-108-AP/MF	0.874	22.2	0.402	10.2	0.142	3.6	0.598	15.2	matte finish only
R-112-T	0.846	21.5	0.630	16.0	0.201	5.1	0.748	19.0	Square, 2 Grooves
R-113-T	0.846	21.5	0.496	12.6	0.201	5.1	0.384	9.8	Square
R-115-AW	0.764	19.4	0.520	13.2	0.327	8.3	1.975	50.2
R-116-AP	0.787	20.0	0.394	10.0	0.248	6.3	0.787	20.0
R-119-T	0.630	16.0	0.394	10.0	0.209	5.3	0.575	14.6	2 Grooves
R-131-T	0.551	14.0	0.394	10.0	0.138	3.5	0.630	16.0	2 Grooves

Don't see what you're looking for? Contact us: Contact Information.

Part Numbers in this catalogue follow the pattern: X-999-MM where: X is a category 999 is an item number MM is a material code ( See Material Codes below ) Part Numbers may also appear in RED: X-999-MM where: Red indicates that special finishes are available. ( See Special Finishes below ).
Material Codes (available for products on this page):
	AP (alumina pink): This is a higher quality alumina oxide, 95 to 99.7% pure. Long lasting, the 99.7% pure ceramic material is commonly available in various surface finishes, making it easier to find a ceramic to fit customer applications.
	AR (alumina red): This is a deep red material, of 85% purity alumina oxide. With low density and low hardness, it is a general purpose ceramic.
	AW (alumina white): This material is white in color. This can be alumina or 95% pure zirconia, and is suitable for general applications.
	PCS (polycrystalline sapphire): This is the latest in ceramics technology. This material is near 100% pure alumina oxide, with high density and hardness. Some of these are also offered in specialized surface finishes, ranging from a smooth mirror finish to a controlled "orange-peel" matte finish.
	T (titania): This material is tan in color, and has been used for many years. 90% pure material, this is a soft ceramic which wears with the yarn, for applications where yarn damage is minimal.
	TC (titania conductive): This material is dark grey in color, and has been widely used for some time. It is the same 90% pure titania, but it is fired with an additive to make it neutralize electric charge. For applications where static is a problem, the nature of this material can be helpful.
Special Ceramic Finishes (available for products on this page with red Part Numbers):
MF (matte finish): This is where the ceramic is polished an refired to give a controlled "orange-peel" surface finish. this finish is recommended for applications with untwisted flat yarn for less friction.
DP (diamond polish): This is the surface finish that involves heavy polishing. The ceramic surface is finished to a very smooth texture which is ideal for use with textured yarns in the twisting and heating zones. Ceramics with this finish are also ideal for use as interlacing jet entrance and exit guides.