Sleeves

Textile Machinery Parts and Components Since 1975
Sleeves for every application.

Sleeves

On This Page: ( Click a Topic ... View a Topic )

Product Specification Table
Part Numbers
Material Codes
Special Finishes

Sleeves - Specification Table

PART #	ID		OD (polished)		LENGTH
PART #	IN	MM	IN	MM	IN	MM
K-093-AW	0.039	1.0	0.071	1.8	1.181	30.0
K-101-AW	0.028	0.7	0.078	2.0	0.783	19.9
K-074-AP	0.036	0.9	0.077	2.0	0.590	15.0
K-063-AP	0.047	1.2	0.079	2.0	0.984	25.0
K-044-AP	0.039	1.0	0.083	2.1	0.819	20.8
K-100-AW	0.028	0.7	0.090	2.3	0.550	14.0
K-110-AP	0.063	1.6	0.098	2.5	0.394	10.0
K-113-AP	0.067	1.7	0.102	2.6	0.472	12.0
K-102-AW	0.075	1.9	0.122	3.1	1.421	36.1
K-034-AP/1	0.063	1.6	0.126	3.2	1.142	29.0
K-079-AP	0.098	2.5	0.138	3.5	1.850	47.0
K-090-T	0.087	2.2	0.158	4.0	0.433	11.0
K-104-AP	0.113	2.9	0.158	4.0	0.799	20.3
K-060-AP	0.126	3.2	0.158	4.0	1.969	50.0
K-069-AP	0.126	3.2	0.189	4.8	1.575	40.0
K-115-AR	0.118	3.0	0.197	5.0	0.787	20.0
K-049-AW	0.120	3.0	0.225	5.7	0.562	14.3
K-054-AW	0.119	3.0	0.229	5.8	0.984	25.0
K-023-AP/1	0.118	3.0	0.236	6.0	2.480	63.0
K-081-AR	0.126	3.2	0.236	6.0	0.512	13.0
K-078-AR	0.126	3.2	0.236	6.0	0.650	16.5
K-112-AW	0.138	3.5	0.248	6.3	1.102	28.0
K-080-T	0.140	3.6	0.250	6.4	2.500	63.5
K-087-AP	0.158	4.0	0.276	7.0	5.906	150.0
K-087-TBR	0.158	4.0	0.276	7.0	5.906	150.0
K-083-AP/1	0.177	4.5	0.276	7.0	1.772	45.0
K-083-AP	0.165	4.2	0.284	7.2	1.772	45.0
K-070-AP	0.197	5.0	0.296	7.5	0.591	15.0
K-068-TC	0.181	4.6	0.311	7.9	0.787	20.0
K-107-AW	0.158	4.0	0.315	8.0	3.938	100.0
K-075-AP	0.197	5.0	0.315	8.0	0.394	10.0
K-092-T	0.201	5.1	0.374	9.5	1.130	28.7
K-042-AR	0.217	5.5	0.374	9.5	0.591	15.0
K-065-TC	0.236	6.0	0.374	9.5	1.063	27.0
K-114-AW-57	0.250	6.4	0.375	9.5	2.250	57.0
K-064-TC	0.217	5.5	0.382	9.7	1.102	28.0
K-064-TC/1	0.236	6.0	0.382	9.7	1.102	28.0
K-066-AP	0.236	6.0	0.386	9.8	0.787	20.0
K-108-AW	0.275	7.0	0.385	9.8	1.460	37.1
K-058-AW	0.138	3.5	0.390	9.9	1.190	30.2
K-099-TC	0.224	5.7	0.390	9.9	0.866	22.0
K-109-AW	0.250	6.4	0.390	9.9	4.475	113.7
K-094-TC	0.197	5.0	0.394	10.0	1.142	29.0
K-050-TC/5	0.197	5.0	0.394	10.0	1.378	35.0
K-103-AW	0.197	5.0	0.394	10.0	19.685	500.0
K-085-TC/MF	0.217	5.5	0.394	10.0	1.181	30.0
K-089-AW	0.224	5.7	0.394	10.0	2.559	65.0
K-050-TC	0.256	6.5	0.394	10.0	1.378	35.0
K-050-TC/4	0.256	6.5	0.394	10.0	1.378	35.0
K-072-TC/1	0.200	5.1	0.398	10.1	1.125	28.6
K-071-TC	0.218	5.5	0.398	10.1	1.125	28.6
K-053-TC	0.223	5.7	0.402	10.2	1.257	31.9
K-051-TC	0.225	5.7	0.401	10.2	2.018	51.3
K-048-TC	0.228	5.8	0.402	10.2	1.138	28.9
K-052-TC	0.118	3.0	0.405	10.3	0.571	14.5
K-082-AR	0.126	3.2	0.406	10.3	0.512	13.0
K-043-AR	0.177	4.5	0.406	10.3	0.787	20.0
K-111-AP	0.252	6.4	0.417	10.6	2.303	58.5
K-117-AW-100	0.236	6.0	0.472	12.0	3.938	100.0
K-077-AR/4	0.256	6.5	0.472	12.0	2.362	60.0
K-077-AR/1	0.256	6.5	0.472	12.0	2.953	75.0
K-077-AR/3	0.256	6.5	0.472	12.0	3.504	89.0
K-077-AR	0.256	6.5	0.472	12.0	5.937	150.8
K-021-TC	0.340	8.6	0.510	13.0	0.825	21.0
K-105-AW	0.315	8.0	0.630	16.0	11.614	295.0
K-088-T	0.331	8.4	0.748	19.0	3.543	90.0
K-116-AP	0.394	10.0	0.984	25.0	2.520	64.0

Don't see what you're looking for? Contact us: Contact Information.

Part Numbers in this catalogue follow the pattern: X-999-MM where: X is a category 999 is an item number MM is a material code ( See Material Codes below ) Part Numbers may also appear in RED: X-999-MM where: Red indicates that special finishes are available. ( See Special Finishes below ).
Material Codes (available for products on this page):
	AP (alumina pink): This is a higher quality alumina oxide, 95 to 99.7% pure. Long lasting, the 99.7% pure ceramic material is commonly available in various surface finishes, making it easier to find a ceramic to fit customer applications.
	AR (alumina red): This is a deep red material, of 85% purity alumina oxide. With low density and low hardness, it is a general purpose ceramic.
	AW (alumina white): This material is white in color. This can be alumina or 95% pure zirconia, and is suitable for general applications.
	T (titania): This material is tan in color, and has been used for many years. 90% pure material, this is a soft ceramic which wears with the yarn, for applications where yarn damage is minimal.
	TBR (titania brown): This is titania material, similar to 90% pure titania, in a slightly browner shade.
	TC (titania conductive): This material is dark grey in color, and has been widely used for some time. It is the same 90% pure titania, but it is fired with an additive to make it neutralize electric charge. For applications where static is a problem, the nature of this material can be helpful.
Special Ceramic Finishes (available for products on this page with red Product ID's):
MF (matte finish): This is where the ceramic is polished an refired to give a controlled "orange-peel" surface finish. this finish is recommended for applications with untwisted flat yarn for less friction.
DP (diamond polish): This is the surface finish that involves heavy polishing. The ceramic surface is finished to a very smooth texture which is ideal for use with textured yarns in the twisting and heating zones. Ceramics with this finish are also ideal for use as interlacing jet entrance and exit guides.